Oce CS240 Operation Manual page 516

13
Expert Adjustment
Parameter
AE Level Adjustment
Printer Ad-
justment
Finisher Ad-
justment
13-24
Description
Specify the initial value for auto exposure (AE) be-
tween 0 and 4. The higher the setting, the more
that the document background is emphasized.
Leading Edge Adjust the starting print position between -3.0 and
Adjustment 3.0 mm at the leading edge of the paper (with re-
spect to the paper feed direction). Adjustments
can be specified for each paper type.
Centering Adjust the starting print position between -3.0 and
3.0 mm at the left edge of the paper (with respect
to the paper feed direction). Adjustments can be
specified for each paper tray.
Leading Edge Ad- Adjust the starting print position between -3.0 and
justment (Duplex 3.0 mm at the leading edge of the paper for the
Side 2) second side during automatic double-sided cop-
ying. Adjustments can be specified for each paper
tray.
Centering (Duplex Adjust the starting print position between -3.0 and
2nd Side) 3.0 mm at the left edge of the paper for the sec-
ond side during automatic double-sided copying.
Adjustments can be specified for each paper tray.
2-Position Staple Adjust the distance (between 128 mm and 160
*1
Pitch Adjustment mm) between staples when printing with the "2
Position" Staple setting ("Staple" and "Center
Staple & Fold").
Center Staple Po- CS240: Adjust the stapling position (between -10
*1
sition and 10 mm) when printing with the "Center Staple
& Fold" setting.
CS231: Adjust the stapling position (between -
12.8 and 12.7 mm) when printing with the "Center
Staple & Fold" setting.
Half-Fold Posi- CS240: Adjust the folding position (between -10
*1
tion and 10 mm) when printing with the "Center Staple
& Fold" setting.
CS231: Adjust the folding position (between -12.8
and 12.7 mm) when printing with the "Center Sta-
ple & Fold" setting.
Tri-Fold Position Adjust the folding positions (between -12.8 mm
*1
Adjustment and 12.7 mm) when printing with the "Tri-Fold"
setting.
Punch Vertical Po- CS240: Adjust the vertical position of the punched
sition Adjust- holes between -10 mm and 10 mm.
*2
ment CS231: Adjust the vertical position of the punched
holes between -5 mm and 5 mm.
Punch Horizontal CS240: Adjust the horizontal position of the
Position Adjust- punched holes between -10 mm and 10 mm.
*2
ment CS231: Adjust the horizontal position of the
punched holes between -5 mm and 5 mm.
Punch Regist Loop CS240: Adjust the hole-punching shift for double-
*2
Size Adjustment sided printing and outputting cover pages in 0.8
mm increments.
CS231:
Adjust the hole-punching shift for double-sided
printing and outputting cover pages between -
16.0 mm and 16.0 mm.
Punch Edge Sen- Adjust the sensors for detecting the paper edges
*2
sor Adjustment when printing with a Punch setting.
Center Staple Po- Adjust the stapling position (between -10 mm and
*3
sition 10 mm) when printing with the "Center Staple &
Fold" setting.
Half-Fold Position Adjust the folding position (between -10 and 10
*3
mm) when printing with the function for folding
copies in half.
Punch Horizontal Adjust the horizontal position of the punched
holes (between -10 and 10 mm) for each paper
Position Adjust-
*4
ment type.
Utility mode
Default Setting
Standard (2)
0.0 mm
0.0 mm
0.0 mm
0.0 mm
128 mm
0.0 mm
0.0 mm
0.0 mm
0.0 mm
0.0 mm
0.0 mm
-
0.0 mm
0.0 mm
0.0 mm
CS240/CS231