Oce CS240 Operation Manual page 416

9
– If desired, touch [Change Pos./Delete], and then change the printing angle in the Position screen.
Select the desired angle, and then touch [OK].
– If desired, touch [Change Pos./Delete] in the Position screen, and then change the arrangement of
the text in the Change Position/Delete screen.
– If there are no more than four lines in the selected repeating stamp, the angle can be changed.
– To change the arrangement order, touch [Change Position], select the repeating stamp text to be
moved, and then touch either [Up] or [Down].
9-94
Pattern Overwrite screen
Position screen
Change Position/Delete screen
Application functions
CS240/CS231