Specifying Document Settings; Specifying The Document Size ("Original Size" Settings) - Oce CS240 Operation Manual

4
4.4

Specifying document settings

The following procedure describes how to specify the type of document to be copied.

Specifying the document size ("Original Size" settings)

Copies can be produced after specifying the document scanning size if the document size cannot be
detected automatically or if you wish to specify a certain document size.
1
Position the document to be copied.
– For details on positioning the document, refer to "Feeding the document" on page 4-8.
2
In the Basic screen, touch [Original Setting].
The Original Setting screen appears.
3
Touch [Original Size].
The Original Size screen appears.
4-18
Basic copy operations
CS240/CS231