4
Copying documents of mixed sizes ("Mixed Original" setting)
Documents of different sizes can be loaded together into the ADF to be fed and scanned one by one
automatically.
0
Do not load more than 100 sheets or so many sheets that the top of the stack is higher than the , mark,
otherwise a document misfeed or damage to the document or machine may occur. However, a
document that exceeds 100 pages can be scanned in separate batches. For details, refer to "Scanning
the document in separate batches ("Separate Scan" setting)" on page 4-11.
0
If the document is not loaded correctly, it may not be fed in straight or a document misfeed or damage
to the document may occur.
1
Slide the adjustable lateral guides of the ADF to fit the size of the largest page.
–
The possible combinations of document sizes differ depending on the widest document loaded
(position of the adjustable lateral guides).
–
For details on the mixed document sizes that can be loaded in the ADF, refer to "Documents that
can be loaded into the ADF" on page 8-23.
2
Arrange the document pages so that the side to be copied
(first page) faces up, as shown in the illustration.
3
Load the document face up in the document feed tray.
Slide the adjustable lateral guides against the edges of the document.
–
Load the document pages into the ADF so that the top of
the pages is toward the back or the left side of the
machine.
4-20
Basic copy operations
Lateral guide
CS240/CS231