Oce CS240 Operation Manual page 508

13
Power Save Settings
Parameter
Low Power Mode Settings
Sleep Mode Setting
Note
[Low Power Mode Setting] appears only if the "Administrator Security Levels" parameter in
Administrator mode is set.
!
Detail
For details on the "Administrator Security Levels" parameter, refer to "Security settings" on page 13-32.
Output Settings
Parameter
Print/Fax Output Settings
Output Tray Setting
Bin Assignment
(CS231)
* CS231: If finisher FS-519 is installed, "Tray 3" is selected as the default setting.
Note
[Output Setting], [AE Level Adjustment] and [Blank Page Print Settings] appear only if the "Administrator
Security Levels" parameter in Administrator mode is set to "Level 2".
CS231: [Bin Assignment] only appears if the optional mailbin kit is installed.
The "Bin Assignment" parameter is set to "Tray 2" only if the optional output tray is installed.
AE Level Adjustment
Description
Specify the initial value for auto exposure. The higher the setting, the more that the doc-
ument background is emphasized.
Auto Paper Select for Small Original
Description
Select whether copying is permitted when the "Auto" Paper setting is selected and ei-
ther no document is placed on the original glass or the document placed on the original
glass is too small for its size to be detected.
• Copy on Small Size:
The document size is determined to be A5, and copies are produced on A5-size pa-
per.
• Copy on A4:
The document size is determined to be A4, and copies are produced on A4-size pa-
per.
• Prohibit Copy:
Copies cannot be produced since the document size cannot be detected. Before
pressing the [Start] key, the paper tray (paper to be printed on) must be selected.
13-16
Description
Specify the desired length of time (between 10 and 240
minutes) until the machine enters Power Save mode.
Specify the desired length of time (between 15 and 240
minutes) until the machine enters Sleep mode.
Description
Specify settings for faxing and printing. For details, refer to the User manual – Fax Op-
erations (Option) and the User manual – Print Operations.
Select the copy output tray for each
type of job (copies, printouts, faxes
and reports).
Select whether or not Tray 1 is
specified as mailbin 5 and the op-
tional output tray is specified as
mailbin 6.
Default Setting
15 minutes
30 minutes
Default Setting
Copy: Tray 1
Print: Tray 1
Print Reports: Tray 2*
Fax: Tray 2*
Not Set
Default Setting
Standard (2)
Default Setting
Prohibit Copy
Utility mode
CS240/CS231