Specifying Pages To Be Printed On The Front Side ("Chapters" Function) - Oce CS240 Operation Manual

Application functions
9.6

Specifying pages to be printed on the front side ("Chapters" function)

When making double-sided copies, the pages specified as the first page of a chapter can be printed on the
front side of the paper. If the document was arranged so that the specified page would be printed on the back
side of a page, the page is left blank and the specified page is printed on the front side of the next page. In
addition, the specified page can be printed on different paper.
!
Detail
A maximum of 30 pages can be specified to be printed on the front side of the paper within a document
of up to 999 pages.
In double-sided documents, one double-sided page is considered to be two pages (one for the front
and one for the back).
Note
Make sure that the paper loaded for the first page of the chapter and for the copy have the same size
and orientation.
1
Position the document to be copied.
– For details on positioning the document, refer to "Feeding the document" on page 4-8.
– For a document that exceeds 100 pages, refer to "Scanning the document in separate batches
("Separate Scan" setting)" on page 4-11.
2
Touch [Application], and then touch [Sheet/Cover/Chapter Insert].
– To cancel changes to the settings for all Application functions, press the [Reset] key. All changes to
the settings are canceled.
The Sheet/Cover/Chapter Insert screen appears.
CS240/CS231
9
9-33