Typing In The Zoom Ratio ("Xy Zoom" Setting) - Oce CS240 Operation Manual

Basic copy operations

Typing in the zoom ratio ("XY Zoom" setting)

By using the keypad, a zoom ratio between 25.0% and 400.0% can be typed in directly without changing the
height-to-width ratio.
0 If a value outside the allowable range is specified, the message "Input error" appears. Type a value
within the allowable range.
If the value was incorrectly entered, press the [C] (clear) key to erase the value, and then specify the
correct value.
0 The entered zoom ratio can be stored. For details on storing zoom ratios, refer to "Storing the desired
zoom ratio" on page 4-43.
1
In the Basic screen, touch [Zoom].
The Zoom screen appears.
2
Touch [XY Zoom].
3
Using the keypad, type in the desired zoom ratio (between 25.0% and 400.0%).
– To cancel changes to the settings, touch [Cancel].
CS240/CS231
4
4-37