Oce CS240 Operation Manual page 292

7
Specifications
Copy output tray capacity
Warm-up time
Image loss width
First copy
Copy speed
Magnification ratios
Multiple copies
Density control
Power requirements
Power consumption
Dimensions
Space requirements
Memory (available hard disk
space)
Weight
*1
There are five Foolscap sizes: 220 e 330 mm w, 8-1/2 e 13 w, 8-1/4 e 13 w, 8-1/8 e 13-1/4 w and 8 e 13
w. Any one of these sizes can be selected. For details, contact your technical representative.
*2
The indicated space requirements represent the space required to pull away the finisher and to open the
right-side door and the paper trays.
CS231: The indicated space requirements represent the space required to pull away the finisher (If Finisher
FS-519 is installed) and the LCT and to open the paper trays.
In order to incorporate improvements, these product specifications are subject to change without notice.
7-4
Plain paper: 250 sheets
Thick paper: 10 sheets
OHP transparencies: 1 sheet
Less than 30 seconds (at room temperature (23 °C)) (when the main power switch is
turned on, then the [Power] (auxiliary power) key is turned on)
Leading edge: 4.2 mm; trailing edge: 3 mm; rear edge: 3 mm; front edge: 3 mm
Full color: 6.5 seconds or less
Black:
CS240: 4.3 seconds or less
CS231: 4.8 seconds or less
(when printing on A4 v paper)
Full color: 45 ppm (single-sided), 45 sides/min. (double-sided)
CS240:
Black: 55 ppm (single-sided), 55 sides/min. (double-sided)
With special paper or with the "Glossy" setting: 23 ppm (single-sided), 23 sides/min.
(double-sided)
(when printing on A4 w paper)
CS231:
Black: 45 ppm (single-sided), 45 sides/min. (double-sided)
With special paper or with the "Glossy" setting: 22 ppm (single-sided), 22 sides/min.
(double-sided)
(when printing on A4 w paper)
Full size: 100.0% ± 0.5% or less
Enlarge: 115.4%, 122.4%, 141.4%, 200.0%
Reduce: 86.6%, 81.6%, 70.7%, 50.0%
Minimal (93.0%)*
Zoom: 25.0% to 400.0% (in 0.1% increments)
Stored zoom ratios: 3
*"Minimal" zoom ratio (between 90.0% and 99.9%)
1 to 9,999 sheets
Copy density: Manual density adjustment (9 levels)
Background density: Automatic and manual density adjustment (9 levels)
CS240: AC220-240 V, 10 A, 50/60 Hz
CS231: AC220-240 V, 10 A, 50/50 Hz
2,000 W or less
650 mm (W) e 777 mm (without the control panel)/915 mm (with the control panel)
(D) e 1,150 mm (H)
*2
CS231/CS240: 2,360 mm (W) e 1,483 mm (D)
CS231: 2,151.8 mm (W) × 1,571.9 mm (D) (If Finisher FS-517/FS-608 is installed)
2,090.9 mm (W) × 1,571.9 mm (D) (If Finisher FS-519 is installed)
1,024 MB (60 GB)
Approx. 190 kg
Specifications
CS240/CS231