Selecting Single-Sided Copies - Oce CS240 Operation Manual

4

Selecting single-sided copies

0 As the factory default, "1-Sided > 1-Sided" is selected.
0 For details on using the original glass to scan multi-page documents, refer to "Scanning a multi-page
document from the original glass" on page 4-14.
1
In the Basic screen, touch [Duplex/Combine].
The Duplex/Combine screen appears.
2
Touch [1-Sided > 1-Sided] or [2-Sided > 1-Sided].
– If "2-Sided > 1-Sided" is selected, specify the position of the binding margin and the orientation of
the loaded document, otherwise the copies will not be printed as desired.
– If the binding position for the document is set to "Auto", the position of the binding margin is
automatically selected. A binding margin along the long side of the paper is selected if the document
length is 297 mm or less. If the document length is more than 297 mm, a binding margin along the
short side of the paper is selected.
– If "Auto" is selected under "Original Bind Direction", the binding margin is set at the top or at the left.
– For a double-sided document, touch [Binding Position], select the binding position of the document,
and then touch [OK].
4-46
Basic copy operations
CS240/CS231