Selecting A Folding Setting - Oce CS240 Operation Manual

Copy operations

Hide thumbs Also See for CS240:

Table of Contents

Basic copy operations

Selecting a folding setting

If options are installed, copies can be folded before being fed out. The following folding settings are available.

The available settings differ depending on the options that are installed.

Center Staple &

CS240: Copies can be folded in half or in three or bound at the center only if Finisher FS-608 is installed.

CS231: Copies can be folded in half or bound at the center only if finisher FS-608 is installed or finisher

FS-519 is installed with the saddle stitcher attached.

Copies can be folded in three only if Finisher FS-608 is installed.

Select this setting to fold copies in half before feeding them out. (Re-

fer to page 4-72.)

Select this setting to staple copies at two places along the center,

then fold the copies in half before feeding them out. (Refer to

Select this setting to fold copies in three before feeding them out.

(Refer to page 4-78.)

Compatible models