Selecting Double-Sided Copies - Oce CS240 Operation Manual

Basic copy operations
3
Touch [Original Direction], select the orientation of the loaded document, and then touch [OK].
– For details on specifying the document orientation, refer to "Selecting the document orientation
("Original Direction" settings)" on page 4-23.
4
Touch [OK].
The Basic screen appears again.

Selecting double-sided copies

0 As the factory default, "1-Sided > 1-Sided" is selected.
0 For details on using the original glass to scan multi-page documents, refer to "Scanning a multi-page
document from the original glass" on page 4-14.
1
In the Basic screen, touch [Duplex/Combine].
The Duplex/Combine screen appears.
2
Touch [1-Sided > 2-Sided] or [2-Sided > 2-Sided].
– Specify the position of the binding margin and the orientation of the loaded document, otherwise
the copies will not be printed as desired.
– If the binding position for the document is set to "Auto", the position of the binding margin is
automatically selected. A binding margin along the long side of the paper is selected if the document
length is 297 mm or less. If the document length is more than 297 mm, a binding margin along the
short side of the paper is selected.
– If "Auto" is selected under "Original Binding Position", the binding margin is set at the top or at the
left.
– If the binding position for the copy is set to "Auto", the binding position is automatically determined
according to the orientation of the loaded document. If the document length is 297 mm or less, a
binding position along the long side of the paper is selected. If the document length is more than
297 mm, a binding position along the short side of the paper is selected.
– If the binding position for the copy is set to "Auto", the binding position is set at the top or at the left.
CS240/CS231
4
4-47