Table of Contents
Advertisement
Application functions
4
Touch [Preset Stamp] or [Registered Stamp] to select the desired stamp type.
–
Touch
–
Only one stamp can be selected.
5
Select the desired setting under "Pages".
–
To print the stamp only on the front cover, touch [1st Page Only].
–
The stamp will not be printed on blank pages inserted using the "Cover Sheet", "Insert Sheet" and
"Chapters" functions.
6
Touch [Print Position], and then select the printing position.
–
To make fine adjustments to the printing position, touch [Adjust Position]. Select the desired
direction under "Left & Right Adjustment" or "Top & Bottom Adjustment", use the keypad or touch
[–] and [+] to specify the adjustment setting, and then touch [OK].
?
What are the limits on the adjustment amount?
% The print position can be finely adjusted in 0.1 mm increments.
Can no adjustments be made?
?
% To make no left/right or up/down adjustments, touch [No Adjustment].
CS240/CS231
or
to display a different list of preset or registered stamps.
9
9-83
Advertisement
Table of Contents
Troubleshooting
