Oce CS240 Operation Manual page 444

10
9
Remove the tape from the protective sheet for the PC drum.
10
Tear off the protective sheet for the PC drum along the
perforation.
11
Insert the new imaging unit into the machine.
– Make sure that the imaging unit is the same color as the
label on the imaging unit compartment.
– Do not insert the imaging unit into its compartment at an
angle.
– Make sure that the imaging unit is fully inserted into its
compartment.
12
Close the securing lever for the imaging unit.
10-16
Replacing toner cartridges and staples and emptying punch scrap box
CS240/CS231