Precautions For Loading Documents Into The Adf; Documents That Can Be Placed On The Original Glass; Precautions For Positioning Documents On The Original Glass - Oce CS240 Operation Manual

Copy operations
Hide thumbs Also See for CS240:
Table of Contents

Advertisement

8

Precautions for loading documents into the ADF

The following types of documents should not be loaded into the ADF, otherwise paper misfeeds or damage
to the document may occur.
-
Wrinkled, folded, curled, or torn documents
-
Highly translucent or transparent documents, such as OHP transparencies or diazo photosensitive
paper
-
Coated documents such as carbon-backed paper
-
Documents printed on paper thicker than 210 g/m
-
Documents printed on paper thicker than 128 g/m
-
Documents that are bound, for example, with staples or paper clips
-
Documents that are bound in a book or booklet
-
Documents with pages bound together with glue
-
Documents with pages that have had cutouts removed or are cutouts
-
Label sheets
-
Offset printing masters
-
Documents with binder holes
-
Documents that have just been printed with this machine
Reminder
Before loading folded documents, such as those folded in half or in a zigzag, into the ADF, be sure to
flatten the pages.

Documents that can be placed on the original glass

To copy documents that cannot be loaded into the ADF, position them on the original glass.
Document types
Document sizes
Maximum weight

Precautions for positioning documents on the original glass

Observe the following precautions when placing the document on the original glass.
-
If a document of non-standard paper size is loaded, the "Auto" Paper setting and "Auto" Zoom setting
cannot be used since the document size cannot be detected automatically.
-
If a document of a non-standard paper size is loaded, select the paper drawer and zoom ratio or touch
[Original Setting] and select the document size.
-
If highly translucent or transparent documents, such as OHP transparencies or diazo photosensitive
paper, are loaded, the document size cannot be detected automatically. Place a blank sheet of paper
of the same size over the document.
-
Do not place objects exceeding 2 kg on the original glass, otherwise the original glass may be
damaged.
-
Do not press down extremely hard on a book spread on the original glass, otherwise the original glass
may be damaged.
8-24
2
2
Original glass documents
Sheets, books (page spreads), three-dimensional objects
A3 w to B6 w, A6 w
11 e 17 w to 5-1/2 e 8-1/2 w/v, 8K, 16K v/w
2 kg
Copy paper/original documents
during double-sided printing
CS240/CS231

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cs231

Table of Contents