Printing Previously Registered Stamps ("Stamp" Function) - Oce CS240 Operation Manual

9
8
Touch [OK], and then touch [Close] in the next screen that appears.
9
Specify any other desired copy settings.
– To cancel the setting and select the default, press the [Reset] key.
10
Using the keypad, type in the desired number of copies.
11
Press the [Start] key.

Printing previously registered stamps ("Stamp" function)

1
Position the document to be copied.
– Use the Copy Protection Utility to register a registered stamp. For details on registering stamps,
refer to the manual of the Copy Protection Utility.
– For details on positioning the document, refer to "Feeding the document" on page 4-8.
2
Touch [Application], and then touch [Stamp/Composition].
– To cancel changes to the settings for all Application functions, press the [Reset] key. All changes to
the settings are canceled.
The Stamp/Composition screen appears.
3
Touch [Stamp].
– To cancel the "Stamp" function, touch [No].
The Stamp screen appears.
9-82
Application functions
CS240/CS231