Setting The "Sound Setting" Functions - Oce CS240 Operation Manual

5

Setting the "Sound Setting" functions

With the Sound Setting functions, settings can be specified for the sounds that are produced, for example,
when a key is pressed.
The following Sound Setting functions are available.
As the factory default, "Medium" is selected for all operation sounds.
Operation Confirmation
Sound
Successful Completion
Sound
Completed Preparation
Sound
Caution Sound
1
Display the Accessibility Setting screen, and then touch
– For details on displaying the Accessibility Setting screen, refer to "Displaying the accessibility
setting screen" on page 5-18.
2
Touch [Sound Setting] or press the [2] key in the keypad.
The Sound Setting screen appears.
5-28
Operation Confirmation Sound
Input Accept Sound When pressing a key in the control panel or a button on the
touch panel
Invalid Input Sound When incorrectly pressing a key in the control panel or a but-
ton on the touch panel
Basic Sound When switching settings and the default setting is selected
Completed Operation When an operation is completed successfully
Sound
Completed Transmis- When a communication operation is completed successfully
sion Sound
When a device has finished setting up
Simple Caution Sound When it is almost time to replace supplies or a replaceable
(Level 1) part and a message appears in the touch panel
Simple Caution Sound When a user has performed an operation incorrectly
(Level 2)
Simple Caution Sound When an error occurs that can be corrected by the user by re-
(Level 3) ferring to the message that appeared or the user manual.
Service Caution Sound When an error occurs that cannot be corrected by the user or
requires a technical representative
Additional copy operations
to display the next screen.
CS240/CS231