Oce CS240 Operation Manual page 174

4
– If a cover sheet is added with the "Cover Sheet" function, the cover sheet (200 g/m
stapled.
– When the "Center Staple & Fold" setting is selected, the following factory default settings are
automatically selected.
1-Sided > 2-Sided
Booklet
Recommended zoom ratio (70.7%) when the "Booklet" function is selected
– When the "Center Staple & Fold" setting is selected, the following Finishing settings are not
available.
Group
Offset
Staple
Punch
– To cancel the "Center Staple & Fold" setting, touch [No] or the button for a different setting.
4
Touch [OK], and then touch [OK] again.
When the saddle stitcher is installed on finisher FS-519 (CS231)
Paper weight
Plain paper
2
(64 g/m to 90 g/m
Thick paper 1/1+/2
2
(91 g/m to 209 g/m
Number of bound pages
Examples of the possible number of bound pages are listed below.
- 2 to 15 sheets of 90 g/m
- 1 sheet of 64 to 209 g/m
- Maximum of 13 sheets of 91 to 120 g/m
- Maximum of 10 sheets of 121 to 150 g/m
- Maximum of 8 sheets of 151 to 209 g/m
!
Detail
In order for copies to be bound at the center or folded in half, all of the following conditions must be met.
The paper width must be between 182 mm and 297 mm.
The paper length must be between 257 mm and 431.8 mm.
1
In the Basic screen, touch [Finishing].
The Finishing screen appears.
4-76
Paper size
B5 w, A4 w, B4 w, A3 w
2
)
2
)
2
paper (maximum of 60 pages)
2
paper + 14 sheets of 64 to 90 g/m
2
paper (maximum of 60 pages)
2
paper
2
paper
2
paper
Basic copy operations
2
) cannot be
Maximum number of folded
sheets
200 sheets or 20 sets
CS240/CS231