Table of Contents
Advertisement
Application functions
–
To cancel the "Date/Time" function, touch [No].
–
To print the date/time only on the first page, touch [Cover Only].
–
The stamp will not be printed on blank pages inserted using the "Cover Sheet", "Insert Sheet" and
"Chapters" functions.
Can the time be omitted?
?
% If "None" is selected, the time is not printed.
5
Touch [Print Position], and then select the printing position.
–
To make fine adjustments to the printing position, touch [Adjust Position]. Select the desired
direction under "Left & Right Adjustment" or "Top & Bottom Adjustment", use the keypad or touch
[–] and [+] to specify the adjustment setting, and then touch [OK].
What are the limits on the adjustment amount?
?
% The print position can be finely adjusted in 0.1 mm increments.
Can no adjustments be made?
?
% To make no left/right or up/down adjustments, touch [No Adjustment].
What happens when a value outside of the allowable range is specified?
?
% The message "Input error" appears. If "Input error" appears or if the adjustment value was
incorrectly entered, touch [No Adjustment] or press the [C] (clear) key, and then specify the correct
value.
CS240/CS231
9
9-77
Advertisement
Table of Contents
Troubleshooting
