Oil Pump - KYMCO Downtown 125i 2009 Service Manual

Cortesia de/ Courtesy of: www.batmotos.com
4
. LUBRICATION SYSTEM

OIL PUMP

REMOVAL
Remove the flywheel and driven gear (refer
to the "STARTER CLUTCH" section in the
chapter 10).
Remove the bolt and then oil separator cover.
＊
When removing and installing the oil
pump, be careful not to allow dust or dirt
to enter the engine.
Pry the snap ring off and remove the oil pump
driven gear, then remove the oil pump drive
chain.
Remove the two oil separator bolts to remove
the oil pump.
4-3
Cortesia de/ Courtesy of: www.batmotos.com
DOWNTOWN 125i
Oil Separator Cover
Snap Ring
Oil Pump Driven Gear
Oil Pump
Oil Separator Bolt
Bolts