Operation
Operating Instructions 171/173 - 02.0 - 09/2019
4.10 Sewing feet
4.10.1 Setting the sewing foot pressure
Proper setting
The sewing material does not slip and is fed through correctly.
Disturbance
• pressure too high: Tearing of the sewing material
• pressure too low: Slipping of the sewing material
Fig. 20: Setting the sewing feet pressure
①
(1) - Adjusting wheel
To set the sewing foot pressure:
1.
Turn the adjusting wheel (1).
• increasing the sewing foot pressure: turn the adjusting
wheel (1) clockwise
• decreasing the sewing foot pressure: turn the adjusting
wheel (1) counterclockwise
39