Setting The Sewing Foot Pressure - DURKOPP ADLER 670 Operating Instructions Manual

34
1. Lift the sewing feet pneumatically using the pedal ( p. 32).
 The lever (1) swivels back to its initial position. The lock of
the sewing feet has been removed.

4.12 Setting the sewing foot pressure

NOTICE
Damage to the sewing material possible if the sewing
foot pressure setting is incorrect!
If the sewing foot pressure is too high, the material could
tear.
If the sewing foot pressure is too weak, the material could
slip.
Set the sewing foot pressure in such a way that the sewing
material slides smoothly over the base without slipping.
Fig. 19: Setting the sewing foot pressure
①
(1) - Adjusting wheel
To set the sewing foot pressure:
1. Set the sewing foot pressure using the adjusting wheel (1).
• Increase sewing foot pressure: turn clockwise
• Reduce sewing foot pressure: turn counterclockwise
Operating Instructions 670/680 - 00.0 - 01/2017
Operation