Care And Cleaning; Inspection And Service; Case Back - Aeris Manta Operating Manual

a
1
CARE A D CLEA I G
Protect your anta from shock, excessive temperatures,
exposure to chemicals, and tampering. Protect the lens against
scratches with a Instrument Lens Protector. Small scratches will
naturally disappear underwater.
 Soak and rinse the anta in fresh water at the end of
each day of diving, and check to ensure that the areas
around the Low Pressure (Depth) Sensor (Fig. 116a), PC
Interface Data Port (Fig. 116b), and Buttons are free of
debris or obstructions.
 To dissolve salt crystals, use lukewarm water or a slightly
acidic bath (50% white vinegar/50% fresh water). After
removal from the bath, place the anta under gently
running water and towel dry before storing.
 Transport your anta system cool, dry, and protected.
I SPECTIO S A D SERVICE
Your anta should be inspected annually by an Authorized
b
AERIS Dealer who will perform a factory prescribed function
check and inspection for damage or wear. To keep the 2 year
limited warranty in effect, this inspection must be completed
one year after purchase (+/- 30 days).
AERIS recommends that you continue to have an inspection
performed every year to ensure it is working properly. The
costs of annual inspections are not covered under the terms of
the 2 year limited warranty.