Advertisement
Cleaning Kit USER'S MANUAL
Performing Cleaning
Before starting the procedure, be
sure to turn off the main power
switch.
Also, do not turn on the power while
the cover is detached.
When you turn on the power and close the
front cover, the carriage may move and
cause injury.
NOTICE
When attaching or detaching the cover, hold it only at the specified location.
Also, before starting cleaning, be sure to detach the cover.
It may be damaged if dropped.
When performing cleaning, do not touch any area other than the specified locations.
Doing so may damage the equipment.
To discharge static electricity from your body, carry out cleaning as described in the procedure. Failure to
follow the procedure for discharging static electricity may result in breakdown.
1
After pressing the [POWER] key to switch off the sub power, turn off the main power switch.
2
Detach the cover shown in the figure.
If you're using FJ-52/42
(1) Open the front cover.
(2) Use the included Phillips screwdriver to remove the screws.
(3) Detach the cover.
6
The POWER LED goes out
Front cover
Cover
Screws (at four places)
Advertisement
