Introduction; Notes To Follow - Roland TB-30 Setup Manual

Introduction

Notes to Follow

The TB-30 is a device used to print on thin film material or other such roll media consisting of material
that lacks firmness. It is not designed for printing on sheet media.
Before printing on sheet media, remove the TB-30.
Media that lacks firmness wrinkles easily, so do not pull back this media.
To prevent media from being pulled back, adhere to the following guidelines.
• Do not use the Print & Cut function.
• Do not use the sheet cutting function.
• Do not pull back the media manually.
• Set the take-up method to "TU3" on the printer.
• Use the "Page Space" setting in VersaWorks to set the page space to "120 mm" (4.72 in.).
2