Connecting To The Ieee 1394 Interface - Ricoh Aficio MP C3500 EFI General Settings Manual

Connecting to the IEEE 1394 Interface

Connect the IEEE 1394 interface cable to the IEEE 1394 interface board.
A
Connect the IEEE 1394 interface cable to the IEEE 1394 port.
B
Connect the other end of the cable into the interface connector on the host
computer.
Check the shape of the connector to the computer. Connect the cable firmly.
Note
❒ Use the interface cable supplied with the IEEE 1394 interface board.
❒ Two interface ports are available for connecting the IEEE 1394 interface ca-
ble. Either is one can be used.
❒ For details about installing the printer driver, see "Preparing the Machine",
Printer Reference.
Reference
"Turning On the Power", About This Machine
"Preparing the Machine", Printer Reference
AQS016S
Connecting to the Interfaces
1
9