Accessing The Pm For Power Systems Graphs; Ibm Web Id And Password; Registering The Partition To A 'Group; Accessing The Pm For Power Systems Website To View Graphs - IBM PERFORMANCE MANAGEMENT FOR POWER SYSTEMS - GRAPH REFERENCE DOCUMENT 10-2010 Reference

Graph reference document
Table of Contents

Advertisement

Accessing the PM for Power Systems Graphs

Accessing the specific LPAR or system graphs after PM for Power Systems has been activated
for transmission involves having:
an IBM Web ID
-
-

registering the partition to a 'group'

-
accessing the PM for Power Systems web site
-
selecting either the Interactive or .pdf icon to view graphs

IBM Web ID and password

To access the entitled graphs, both the No Additional Charge (summary level) and Fee Service
(detail level) reports, the user is required to have an IBM Web ID with password, and access to a
browser.
IBM Web IDs and passwords, if the user does not currently have one, are available for request at:
https://www.ibm.com/account/profile/
Registering the Partition to a 'Group'
Once a respective partition has transmitted data for the first time, the PM for Power Systems
process will email the client a registration key for the respective partition. It is the user's
responsibility to log into the PM for Power Systems graph site at:
https://pmeserver.rochester.ibm.com/PMServerInfo/loginPage.jsp
and register the partition to a group. This must be done before any subsequent graphs are
viewable.
Instructions for registering a partition are self-documented in the registering process. Simply
follow the 'tabs' for registering the partition to an existing or new 'group'.

Accessing the PM for Power Systems Website to View Graphs:

General information on PM for Power Systems including any set up instructions is available at the
PM for Power Systems home page:
http://www-03.ibm.com/systems/power/support/perfmgmt/index.html
On the right hand side of that page is a call out box for PM for Power Systems reports with a link
to the actual log in page for report access.
https://pmeserver.rochester.ibm.com/PMServerInfo/loginPage.jsp
It is at this site that the client must indicate they are a customer and enter the IBM Web ID.
PM for Power Systems Graph Reference Document
13

Advertisement

Table of Contents
loading

This manual is also suitable for:

Performance management for power systems

Table of Contents