A Error Messages; Telnet Errors - IBM Terminal Emulation TN5250 User Manual

A

Telnet Errors

Table A-1 Telnet Errors
Message
Unable to allocate memory for
xxxxxx.key
Memory allocation failure while
installing multiple key
Memory allocation failure for
session
Memory allocation failure for
general work area
TELNET: tcp/telnet: unknown
service
TELNET: select() failed errno =
Error-Number
Error Messages
This section describes the error messages that might display on your terminal
screen during a TN5250 session. These error messages are grouped into three
categories:

Telnet errors

TN5250 internal errors
Status Line errors
Telnet errors are generated by Telnet communications software within a
TN5250 terminal. These errors are related to initialization, start up, or
connections during a session. They are normally due to operator error,
incorrect command syntax, or network failures, and can usually be corrected
by the system administrator. Table A-1 lists Telnet error messages.
Cause
Unable to allocate memory.
Unable to allocate memory.
Unable to allocate memory.
Unable to allocate memory.
The TCP/Telnet service is not
supported for the current host.
An internal error within the
TN5250 client. Possible TCP/IP
network problem.
Resolution
See your system administrator.
See your system administrator.
See your system administrator.
See your system administrator.
See your system administrator.
Try the connection again.