Utility-Accessory Outlet - Barco HDX series Installation Manual

4. Input & Communication
4.4

Utility-Accessory Outlet

What can be done ?
An extra DMX controlled accessory can be added to projector.
Some examples of the use of this connector:
• Connect external accessories like the Catalyst Mirrorhead (Even if this example still needs a extra Power supply
• Connect other DMX enabled devices like, color changers, shutters, dimmer wheels
• Connect a DMX Lens option
• Connect a DMX rigging frame level device
• Use for external relay
Image 4-5
Utility-accessory outlet
Pin configuration
1 GND
2 DMX Data –
3 DMX Data +
4 Power 9 - 24 Volt DC With Setting in menu 9 / 12 / 24 @ 25W
Note : do not overload ! Maximum 1A on 24V is allowed.
The connector is a duplicated output of the DMX signal entering the projector over the 5 Pin XLR
60 R5905032 HDX SERIES 01/06/2011