Convergence - Barco HDX series Installation Manual

14. Service

14.5 Convergence

What can be done?
The convergence patterns can be used to check the convergence alignment of red, green and blue. If there is a misalignment of at
least one 1 pixel, an electronic realignment is possible.
Mechanical realignment of the convergence can only be done by a qualified service technician.
How to display the convergence settings
1. Press Menu to activate the menus and select Service → Convergence.
Image 14-45
Main menu, service
Image 14-47
Convergence pattern
2. Use the ▲ or ▼ key to select a pattern.
3. Press ENTER to start the adjustment.
Image 14-48
Convergence adjustment
280
Image 14-46
Service, convergence
R5905032 HDX SERIES 01/06/2011