5. Getting started
The current mains input voltage is indicated on the voltmeter just above the power switch.
The background image of the startup screen and info screens can be changed with Projector Toolset with an
installed HDX plug-in.
Lamp overview
Once the projector is started, press Lamp to get an overview of the lamp parameters such as :
Image 5-4
Local screen, lamp
•
number of Strikes
•
Run time in hours
•
Remaining run time in hours
•
slide bar indication with percentage indication of the current run time, compared with the maximum life time of the lamp.
Software overview
Once the projector is started, press About to get an overview of the software versions such as :
Image 5-5
Local screen, about
66
R5905032 HDX SERIES 01/06/2011