Test Patterns In Adjustment Mode - Barco HDX series Installation Manual

7. Start up of the adjustment mode
7.7

Test patterns in adjustment mode

Overview
When the adjustment mode is started, a test pattern can be called at any moment just by pressing the Pattern key on the RCU or the
local key path. Press as many times on the Pattern key as necessary to display the desired test pattern. The test pattern remains
on the screen as long as the adjustment mode is selected, even when selecting other menus. When leaving the adjustment mode,
the selected test pattern is cleared and the normal image is displayed again.
92 R5905032 HDX SERIES 01/06/2011