Auto Dimming - Barco HDX series Installation Manual

8.5.5

Auto Dimming

About auto dimming
When no signal is detected on the selected input the lamp power will be reduced from the current value to its minimum value. When
the input signal is re-detected, the lamp power is restored to its original value.
How to set up
1. Press Menu to activate the menus and select Input → No Signal. → Auto Dimming.
Image 8-29
Main window
Image 8-31
No signal, auto dimming
2. Press ENTER to toggle between [On] or [Off].
[On] : when no signal, auto dimming is started.
[Off] : when no signal, no auto dimming is started.
R5905032 HDX SERIES 01/06/2011
Image 8-30
Input, no signal
8. Input
111