Warping Status - Barco HDX series Installation Manual

12.8.2 Warping status

About warp status
The status of warping determines how warping can be done.
Off No warping possible.
Manual Warping can be manually adjusted.
File Warping is done by uploading a file which contains the warp settings.
How to set the warp status
1. Press Menu to activate the menus and select Alignment → Warping.
Image 12-24
Main menu, alignment
Image 12-26
Warping, status
2. Press ENTER to toggle between [Off], [Manual] or [File].
R5905032 HDX SERIES 01/06/2011
Image 12-25
Alignment, warping
12. Alignment
195