Black Level Adjustment - Barco HDX series Installation Manual

12. Alignment

12.14.7 Black level adjustment

Why black level adjustment
For dark images, the overlap zone will be brighter then the rest of the images. Typically for DLP projectors, next to the overlap
zone, a brighter area is recognized. This area is known as a DLP leakage area. This area must also be exclude for the black level
adjustment. Therefore we can rise the black level of the remaining image (excluding the overlap zone and the DLP leakage area).
First, the width of the leakage area must be set. The white cursor line indicates the border of the overlap area. The green cursor
line indicates the current installed DLP leakage area border and starts at the position of the white cursor line (no width installed).
This green line can be moved to the border of the DLP leakage area with the cursor keys.
Image 12-87
DLP Leakage area set up
After the area is set, use TEXT key to remove the area border lines when adjusting the black level.
How to set the leakage area width
1. Press Menu to activate the menus and select Alignment → Scenergix → Black level.
Image 12-88
Main menu, alignment
220
Image 12-89
Alignment, Scenergix
R5905032 HDX SERIES 01/06/2011