Warp File Service - Barco HDX series Installation Manual

12.8.7 Warp file service
Before warp files can be used, these files must be downloaded on the projector via Projector Toolset equipped
with a HDX plug in.
How to start up
1. Press Menu to activate the menus and select Alignment → Warping → Warp File Service.
Image 12-46
Main menu, alignment
Image 12-48
Warp file service
2. Press ENTER to activate.
A list with possible warp files is displayed.
Image 12-49
List of warp files
3. Use the ▲ or ▼ key to select the desired warp file and press ENTER to load this file.
R5905032 HDX SERIES 01/06/2011
Image 12-47
Alignment, warping
12. Alignment
203