Dp4K-L Series Accessory Kit; Kit Content - Barco DP4K-L Series Installation Manual

1. DP4K-L SERIES ACCESSORY KIT

Purpose of this upgrade kit
This accessory kit may only be used to support and isolate the coupling of the hoses of the projector.
Where to use
There exist two accessory kits for the DP4K-L series. One for the DP4K-22L and DP4K-30L and one for
the DP4K-45L and DP4K-60L. For ordering numbers see Barco website www.barco.com.
About this document
This document gives a brief introduction of the accessory kit and explains with detailed step by step in-
structions how to install the insulation shells and the hoses support assembly. The latest version of this
document can be downloaded from the Barco website www.barco.com.
W
ARNING
technicians.
Overview
•

Kit content

• Installation process
• Assembling the support frame
• Installing the support frame for hoses upwards
• Installing the support frame for hoses downwards
• Installing insulation shells projector side hoses upwards
• Installing insulation shells projector side hoses downwards
• Installing insulation shells on the chiller side
• Installing the plastic catch basin
• Installing the castor wheels
1.1 Kit content
In the box:
• Insulation shells hoses upwards projector rear-left side (1 set, reference 1 image 1-1)
• Insulation shells hoses downwards projector rear-left side (1 set, reference 2 image 1-1)
• Insulation shells hoses upwards/downwards projector rear-right side (1 set, reference 3 image 1-1)
R5905882 DP4K-L ACCESSORY KIT 06/09/2017
:
The procedures below may only be performed by Barco trained and qualified
1. DP4K-L series accessory kit
3