Native Resolution - Barco HDX series Installation Manual

8. Input
8.4

Native resolution

What can be done
The aim here is to always show the resolution of the source independently of the resolution of the DMD panels.
When the resolution of the source is exactly the resolution of the DMD panels, then the full content will be shown on the full DMD (A).
When the resolution of the source is higher than the resolution of the DMD panels, then only part of the image will be shown (B)
When the resolution of the source is lower than the resolution of the DMD panels, then the full image will be shown but only on part
of the DMD is used.
Image 8-14
When the show native resolution function is in the ON position, the projector handles the source as follows:
Source
Name Ratio
XGA 4:3
SXGA 5:4
SXGA+ 4:3
UXGA 4:3
WUXGA 16:10
How to toggle to native resolution?
1. Press Menu to activate the menus and select Input → Native Resolution [On].
2. Press ENTER to toggle between [On] and [Off].
[On] : images displayed in native resolution
[Off] : images scaled to fill the complete screen
104
Projected image
Resolution Ratio
1024x768 4:3
1280x1024 5:4
1400x1050 4:3
1600x1200 4:3
1920x1200 16:10
Resolution
1024x768
1280x1024
1400x1050
1600x1200
1920x1200
R5905032 HDX SERIES 01/06/2011
image projected with black
borders
image projected with black
borders
image projected with black
borders
image projected with black
borders left and right.
normal image projected