Load Layout File - Barco HDX series Installation Manual

10. Layout
10.5.1 Load layout file
When loading a layout that requires two sources, the PiP window On/Off setting will be switched to On.
How to load file
1. Press Menu to activate the menus and select Layout → Layout File Services → Load.
Image 10-37
Main menu, layout
Image 10-39
Layout file services, load
2. Press ENTER to select.
The Load layout overview window opens.
When staying for at least 3 seconds on the same file selection after scrolling through the list of layoout files a pre-load is started.
Image 10-40
Load layout file list
3. Use the ▲ or ▼ key to select the desired file and press ENTER to activate.
The radio button in front of the selected file is checked.
168
Image 10-38
Layout, layout file services
R5905032 HDX SERIES 01/06/2011