Barco HDX series Installation Manual page 24

2. General
-50%
L
Image 2-9
Vertical and horizontal shift range
P DMD.
F Field of view.
It is mechanical possible to shift outside the recommended field of view, but it will result in a decline of image
quality depending on the used lens and the zoom position of the used lens. Furthermore, shifting too much
in both directions will result in a blurred image corner.
Best image quality is projected in the On-Axis configuration.
Horizontal and vertical projector tilt ranges
The projector can be rotated and mounted at any vertical angle. In other words, you can tilt the lens side of the projector as much
as desired for your application.
Side to side tilt, however, must not exceed ±15°. This limit ensures that the lamp in the projector operates properly and safely. More
tilting within area C is allowed but lamp flicker can happen.
A
15°
15°
Image 2-10
Tilting allowed without problems
A
B No tilting allowed in this area
Tilting allowed but lamp flicker possible
C
Projector lamp will not start up when out of tilt range due to build-in tilt sensor.
20
+120%
U
+50%
R
D
-20% P
F
B
A
15°
15°
C
F
SIDE VIEW
U
P
D
F
TOP VIEW
L
P
R
360°
R5905032 HDX SERIES 01/06/2011
+120%
-20%
-50%
+50%