Dmx Address - Barco HDX series Installation Manual

13. Projector Control

13.7.1 DMX address

What should be done ?
Before a projector can execute DMX commands, a unique address, called DMX address, should be given to the projector. This
address can vary from 1 to 512.
How to set the DMX address
1. Press Menu to activate the menus and select Projector Control → DMX → Address.
Image 13-51
Main menu, projector control
Image 13-53
DMX, address
2. Press ENTER to select.
Image 13-54
DMX address
3. Use the ▲ or ▼ key to change the selected character.
Use the ◄ or ► key to select another character.
Note: Digits can be entered with the digit keys on the remote control or the local keypad. When a digit is entered in that way,
the next character will be selected automatically.
250
Image 13-52
Projector control, DMX
R5905032 HDX SERIES 01/06/2011