Wired Dhcp Set Up - Barco HDX series Installation Manual

13. Projector Control

13.5.2 Wired DHCP set up

How to set up
1. Press Menu to activate the menus and select Projector Control → Network.
Image 13-15
Main menu, projector control
Image 13-17
Wired DHCP
2. Use the ▲ or ▼ key to select DHCP under Wired and press ENTER to toggle between [On] or [Off].
[On] : DHCP is activated. An automatic IP address is assigned.
[Off] : DHCP is deactivated. A fixed address must be used.
234
Image 13-16
Projector control, network
R5905032 HDX SERIES 01/06/2011