Shortcut Keys To The Menus - Barco HDX series Installation Manual

7.6

Shortcut keys to the menus

About a shortcut key
The digit keys 5 to 9 can be customer programmed to directly open a pre-stored menu. That menu can be any independent menu
out of the list of menu. A menu which is built up by the content of a previous menu cannot be stored behind a shortcut.
How to use a shortcut key
While in the operational mode, no menu selected, just press on the desired digit key to open the menu behind that shortcut key.
How to create a shortcut key
Scroll to the desired menu. Press the digit key behind which the menu must be stored for 5 seconds. When the creation is success-
fully, a confirmation message appears on the screen. E.g. :
Image 7-5
Select Yes to confirm the creation.
To erase the shortcut, navigate to Projector Control → Buttons.
R5905032 HDX SERIES 01/06/2011
7. Start up of the adjustment mode
91