White Level Adjustment (Blending Area) - Barco HDX series Installation Manual

12.14.6 White level adjustment (blending area)

How to set
1. Press Menu to activate the menus and select Alignment → Scenergix → White level.
Image 12-80
Main menu, alignment
Image 12-82
Scenergix, white level
2. Press ENTER to select the White level adjustments.
The White level position menu opens.
When Adjustment lines is [On], the different areas are displayed on the screen.
Image 12-83
White level position
3. Use the ▲ or ▼ key to select one of the four size adjustments and press ENTER to select
Use the ◄ or ► key to change the border of the blending area to the desired position (value between 0 and 255)
R5905032 HDX SERIES 01/06/2011
Image 12-81
Alignment, Scenergix
12. Alignment
217