Manual Load File - Barco HDX series Installation Manual

9.6.2 Manual Load file
How to load
1. Press Menu to activate the menus and select Image → Image File Services → Manual Load.
Image 9-53
Main menu, Image
Image 9-55
Image file services
2. Press ENTER to select.
Depending on the File Load Filter setting a full list or a list fitting the selected source is displayed.
When staying for at least 3 seconds on the same file selection after scrolling through the list of image files a pre-load is started.
Image 9-56
Load file
3. Use the ▲ or ▼ key to select the desired file and press ENTER to load this file.
The image is not perfect
If the displayed image is not correct after selecting the best fitting file, go to the Timings menu and change the file settings.
R5905032 HDX SERIES 01/06/2011
Image 9-54
Image, image file services
9. Image
139