Replacement Of The High Density Dust Filter - Barco HDX series Installation Manual

16. Servicing
16.8 Replacement of the high density dust filter
C
AUTION
tions of the projector.
W
ARNING
Necessary parts
New filter (available kit : R98010085, contains 5 high density filters and one cleanable filter)
How to replace
1. Remove the front cover, see "Removal of the front cover", page 300.
2. Push both filter holders to the outside.
Image 16-12
Filter replacement
3. Take out the filter and insert a new one.
C
AUTION
306
:
The high density filter must be replaced on a regular basis, depending on the environment condi-
:
Switch off the projector and unplug the power cord before starting the procedure.
:
Never clean the filter Always replace with a new one.
R5905032 HDX SERIES 01/06/2011