Cable Input - Barco HDX series Installation Manual

8.2.5

5 cable input

How to select
Select 5 cable and press ENTER to open the selections
Image 8-7
Slot module type, 5-cable
Use the ▲ or ▼ key to select the desired configuration and press ENTER to select.
When e.g. CVBS/S-VIDEO AUTO is selected, the projector discovers itself which type of signal is connected to it and loads the
correct settings.
For RGB selections, advanced settings are possible. To adjust these advanced settings, use the ▲ or ▼ key to select Advanced
settings and press ENTER. The advanced settings menu opens:
Press ENTER to toggle between [Analog] and [TTL].
R5905032 HDX SERIES 01/06/2011
Image 8-8
5 cable configuration
8. Input
101