Barco HDX series Installation Manual page 334

E. Stacking HDX projectors
Extra actions for ceiling mounted stack
Two safety cables must be mounted between both projectors.
1. Mount the safety cable around the carrying handle of the bottom projector. Push the safety hook through the loop.
Image E-4
Security cables, mount
2. Mount the other end of the security cable around the carry handle of the top projector and clasp the safety hook round the cable
as illustrated.
Make sure that the falling distance is maximum 20 cm. If necessary, before clasping the safety hook around the cable, turn the
cable a few time around the carry handle.
3. Repeat this procedure for the second safety cable on the other side of the carry handle.
W
ARNING
mount configuration.
How to open an interlocking adapter
1. Open an interlocking adaptor as illustrated.
330
:
Always use both safety cables of the lowest projector to secure a stacked projector in a ceiling
R5905032 HDX SERIES 01/06/2011