6.24
Torque control
For details, refer to Instruction Manual (E6581331) specified in Section 6.42.
6.24.1 Torque command
: V/f control mode selection
: Torque command selection
: VI/II input point 1 setting
: VI/II input point 2 setting
: RR/S4 input point 1 setting
: RR/S4 input point 2 setting
: RX input point 1 setting
: RX input point 2 setting
: AI2 input point 1 setting
: AI2 input point 2 setting
: Prohibition of rotation in any direction other than the specified one (F or R)
: Opelation panel torque command
For details, refer to Instruction Manual (E6581331) specified in Section 6.42.
6.24.2 Speed limits in torque control mode
: Forward speed limit input selection
: Forward speed limit input level
: Reverse speed limit input selection
: Reverse speed limit input level
For details, refer to Instruction Manual (E6581331) specified in Section 6.42.
: VI/II input point 1 rate
: VI/II input point 2 rate
: RR/S4 input point 1 rate
: RR/S4 input point 2 rate
: RX input point 1 rate
: RX input point 2 rate
: Torque reference filter
: Torque reference polarity selection
: Speed limit (torque=0) center value
reference selection
: Speed limit (torque=0) center value
: Speed limit (torque=0) band
F-43
E6581442
6