Yamaha XT1200Z(Z) 2010 Service Manual page 52

4. Connect:
• Lead
• Coupler
• Connector
TIP
• When connecting a coupler or connector, push
both sections of the coupler or connector to-
gether until they are connected securely.
• Make sure all connections are tight.
5. Check:
• Continuity
(with the pocket tester)
Pocket tester
90890-03132
TIP
• If there is no continuity, clean the terminals.
• When checking the wire harness, perform
steps (1) to (4).
BASIC SERVICE INFORMATION
• As a quick remedy, use a contact revitalizer
available at most part stores.
1-43