Related Manuals for Yamaha Super Tenere XTZ1200Z
Summary of Contents for Yamaha Super Tenere XTZ1200Z
- Page 1 Read this manual carefully before operating this vehicle. OWNER’S MANUAL XT1200Z 23P-28199-E2...
- Page 2 Read this manual carefully before operating this vehicle. This manual should stay with this vehicle if it is sold. DECLARATION of CONFORMITY Company: YAMAHA MOTOR ELECTRONICS CO., LTD. Address: 1450-6, Mori, Mori-Machi, Shuchi-gun, Shizuoka-Ken, 437-0292 Japan Hereby declare that the product:...
- Page 3 Welcome to the Yamaha world of motorcycling! As the owner of the XT1200Z, you are benefiting from Yamaha’s vast experience and newest technology regarding the de- sign and manufacture of high-quality products, which have earned Yamaha a reputation for dependability.
-
Page 4: Important Manual Information
IMPORTANT MANUAL INFORMATION EAU10133 Particularly important information is distinguished in this manual by the following notations: This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death. - Page 5 IMPORTANT MANUAL INFORMATION EAU10200 XT1200Z OWNER’S MANUAL ©2011 by Yamaha Motor Co., Ltd. 1st edition, July 2011 All rights reserved. Any reprinting or unauthorized use without the written permission of Yamaha Motor Co., Ltd. is expressly prohibited. Printed in Japan.
-
Page 6: Table Of Contents
TABLE OF CONTENTS SAFETY INFORMATION ....1-1 Adjusting the front fork ....3-28 Engine oil and oil filter cartridge ... 6-11 Adjusting the shock absorber Final gear oil ........ 6-14 DESCRIPTION ........2-1 assembly ........3-30 Coolant ........6-15 Left view ..........2-1 Carriers ........ - Page 7 TABLE OF CONTENTS Lubricating the swingarm pivots .........6-26 Checking the front fork ....6-27 Checking the steering ....6-27 Checking the wheel bearings ..6-28 Battery ..........6-28 Replacing the fuses ......6-29 Replacing a headlight bulb ...6-31 Tail/brake light ......6-32 Replacing a turn signal light bulb ...........6-33 Replacing a license plate light bulb ...........6-33...
-
Page 8: Safety Information
SAFETY INFORMATION EAU1031A Safe Riding • Ride where other motorists can Perform the pre-operation checks each see you. Avoid riding in another time you use the vehicle to make sure it motorist’s blind spot. Be a Responsible Owner is in safe operating condition. Failure to Many accidents involve inexperi- As the vehicle’s owner, you are respon- inspect or maintain the vehicle properly... - Page 9 SAFETY INFORMATION due to excessive speed or under- Protective Apparel Avoid Carbon Monoxide Poisoning cornering (insufficient lean angle The majority of fatalities from motorcy- All engine exhaust contains carbon for the speed). cle accidents are the result of head in- monoxide, a deadly gas.
- Page 10 Yamaha accessories, which are avail- treme caution when adding cargo or able only from a Yamaha dealer, have accessories to your motorcycle. Use Shifting weights can create a sud- been designed, tested, and approved extra care when riding a motorcycle den imbalance.
-
Page 11: Specifications
• Accessories fitted to the handle- Use caution when adding electri- genuine Yamaha accessories, recog- bar or the front fork area can cal accessories. If electrical acces- nize that some aftermarket accessories... - Page 12 SAFETY INFORMATION Check that the fuel cock (if equipped) is in the “OFF” position and that there are no fuel leaks. Point the front wheel straight ahead on the trailer or in the truck bed, and choke it in a rail to pre- vent movement.
-
Page 13: Description
DESCRIPTION EAU10410 Left view 1. Fuel tank cap (page 3-22) 9. Engine oil drain bolt (oil tank) (page 6-11) 2. Seat lock (page 3-25) 10.Engine oil drain bolt (crankcase) (page 6-11) 3. Grab bar 11.Engine oil filter cartridge (page 6-11) 4. -
Page 14: Right View
DESCRIPTION EAU10420 Right view 13 12 1. Rear brake fluid reservoir (page 6-22) 9. Owner’s tool kit (page 6-2) 2. Shock absorber assembly spring preload adjusting knob (page 3-30) 10.Battery (page 6-28) 3. Front fork rebound damping force adjusting screw (page 3-28) 11.Engine oil filler cap (page 6-11) 4. -
Page 15: Controls And Instruments
DESCRIPTION EAU10430 Controls and instruments 1. Clutch lever (page 3-17) 9. Throttle grip (page 6-17) 2. Left handlebar switches (page 3-16) 10.Main switch/steering lock (page 3-3) 3. Clutch fluid reservoir (page 6-22) 4. Multi-function meter unit (page 3-8) 5. Auxiliary DC jack (page 3-35) 6. -
Page 16: Instrument And Control Functions
INSTRUMENT AND CONTROL FUNCTIONS EAU49431 Touring mode “T” EAU10977 D-mode (drive mode) Immobilizer system The touring mode “T” is suitable for var- D-mode is an electronically controlled ious riding conditions. engine performance system with two This mode allows the rider to enjoy mode selections (touring mode “T”... - Page 17 Do not expose any key to exces- a Yamaha dealer to have them re-reg- sively high temperatures. istered. Do not use the key with the red Do not place any key close to bow for driving.
-
Page 18: Main Switch/Steering Lock
INSTRUMENT AND CONTROL FUNCTIONS EAU10472 EAU26811 To lock the steering Main switch/steering lock All electrical circuits are supplied with power; the meter lighting, taillights, li- cense plate light and auxiliary lights come on, and the engine can be start- ed. The key cannot be removed. The headlights come on automatically when the engine is started and stay on until the key is turned to “OFF”. -
Page 19: Indicator Lights And Warning Lights
INSTRUMENT AND CONTROL FUNCTIONS To unlock the steering ECA11020 EAU49391 Indicator lights and warning NOTICE lights Do not use the parking position for an extended length of time, other- 7 8 9 wise the battery may discharge. 1. Push. 2. Turn. 1. - Page 20 Even if the oil level is sufficient, the or if the warning light remains on, have The corresponding indicator light flash- warning light may flicker when a Yamaha dealer check the electrical es when the turn signal switch is riding on a slope or during sudden circuit.
- Page 21 INSTRUMENT AND CONTROL FUNCTIONS Display Conditions What to do Under 39 °C Message “Lo” is displayed. OK. Go ahead with riding. (Under 103 °F) 40–116 °C Coolant temperature is dis- OK. Go ahead with riding. (104–242 °F) played. 117–120 °C Stop the vehicle and allow it to idle until Message “HI”...
- Page 22 If this oc- If the light does not come on initially tem reverts to conventional braking. curs, have a Yamaha dealer check the Therefore, be careful not to cause when the key is turned to “ON”, or if the self-diagnosis system.
-
Page 23: Multi-Function Meter Unit
“ON”, or if the indicator light remains on, have Be sure to stop the vehicle before a Yamaha dealer check the electrical making any setting changes to the circuit. multi-function meter unit. Changing... - Page 24 INSTRUMENT AND CONTROL FUNCTIONS settings while riding can distract the an LCD and tachometer bright- Tachometer operator and increase the risk of an ness control mode accident. The left and right set buttons, located under the display, allow you to control multi-function meter unit...
- Page 25 INSTRUMENT AND CONTROL FUNCTIONS Odometer and tripmeter modes the display between the various tripme- Clock ter and odometer modes in the follow- ing order: TRIP F → ODO → TRIP 1 → TRIP 2 → TRIP F When selecting “TRIP 1”, “TRIP 2” or “TRIP F”, the display flashes for five seconds.
- Page 26 “km/L” or “L/100 km”, segments start flashing. If this occurs, starts after the button is released. and the average fuel consumption have a Yamaha dealer check the elec- mode “AVE_ _._ km/L” or “AVE_ _._ trical circuit. Fuel meter L/100 km”...
- Page 27 INSTRUMENT AND CONTROL FUNCTIONS AVE_ _._ km/L, AVE_ _._ L/100 km or Coolant temperature mode Instantaneous fuel consumption mode AVE_ _._ MPG → air intake tempera- ture Air intake temperature mode 1. Coolant temperature display 1. Instantaneous fuel consumption display 2.
- Page 28 INSTRUMENT AND CONTROL FUNCTIONS To switch between the instantaneous The “AVE_ _._ km/L” display Drive mode display fuel consumption displays, push the shows the average distance that right button when one of the displays is can be traveled on 1.0 L of fuel. shown.
- Page 29 If a problem is detected in the immobi- key and both standard keys to a lizer system circuits, the immobilizer Yamaha dealer and have the stan- system indicator light flashes and the dard keys re-registered. display indicates an error code.
-
Page 30: Anti-Theft Alarm (Optional)
This model can be equipped with an 2. Push and hold the left button. If the display indicates an error optional anti-theft alarm by a Yamaha 3. Turn the key to “ON”, and then re- code, the vehicle should be checked dealer. -
Page 31: Handlebar Switches
INSTRUMENT AND CONTROL FUNCTIONS EAU12349 Right position. To cancel the turn signal Handlebar switches lights, push the switch in after it has re- turned to the center position. Left EAU12500 Horn switch “ ” Press this switch to sound the horn. EAU12660 Engine stop switch “... -
Page 32: Clutch Lever
INSTRUMENT AND CONTROL FUNCTIONS EAU12733 The selected mode is shown on the EAU12830 Hazard switch “ ” Clutch lever drive mode display. (See page 3-13.) With the key in the “ON” or “ ” posi- tion, use this switch to turn on the haz- ard lights (simultaneous flashing of all turn signal lights). -
Page 33: Shift Pedal
INSTRUMENT AND CONTROL FUNCTIONS Make sure that the appropriate setting EAU12871 EAU49516 Shift pedal Brake lever on the adjusting dial is aligned with the The brake lever is located at the right arrow mark on the clutch lever. handlebar grip. To apply the front The clutch lever is equipped with a brake, pull the lever toward the handle- clutch switch, which is part of the igni-... -
Page 34: Brake Pedal
INSTRUMENT AND CONTROL FUNCTIONS After coming to a stop while apply- Make sure that the appropriate setting EAU49481 Brake pedal ing the brake lever, the unified on the adjusting dial is aligned with brake system is still enabled. As the “ ”... -
Page 35: Abs
ABS and the unified brake The Yamaha ABS (Anti-lock Brake but these do not indicate a mal- system. System) features a dual electronic con- function. -
Page 36: Traction Control System
INSTRUMENT AND CONTROL FUNCTIONS EAU49416 proach surfaces that Traction control system slippery with caution and avoid es- Use “TCS” mode “Off” to help free the The traction control system helps main- pecially slippery surfaces. rear wheel if the motorcycle gets stuck tain traction when accelerating on slip- There are three traction control system in mud, sand, or other soft surfaces. -
Page 37: Fuel Tank Cap
2. Fuel tank cap lock cover 1. Traction control system switch Yamaha dealer check the motorcycle 2. Traction control system mode display To open the fuel tank cap as soon as possible. -
Page 38: Fuel
INSTRUMENT AND CONTROL FUNCTIONS EAU13221 Fuel The fuel tank cap cannot be closed un- Make sure there is sufficient gasoline in less the key is in the lock. In addition, the tank. the key cannot be removed if the cap is EWA10881 WARNING not properly closed and locked. -
Page 39: Fuel Tank Breather Hose And Overflow Hose
Do not allow the engine to idle Make sure that the end of each more than a few minutes. Long Your Yamaha engine has been de- hose is positioned outside of the idling can cause a build-up of signed to use premium unleaded gaso- cowling. -
Page 40: Rider Seat
INSTRUMENT AND CONTROL FUNCTIONS ECA10701 EAU49443 Rider seat NOTICE Use only unleaded gasoline. The use To remove the rider seat of leaded gasoline will cause unre- 1. Insert the key into the seat lock, pairable damage to the catalytic and then turn it counterclockwise. converter. -
Page 41: Adjusting The Rider Seat Height
INSTRUMENT AND CONTROL FUNCTIONS EAU49473 4. Insert the projection on the rear of Adjusting the rider seat height the rider seat into seat holder A as The rider seat height can be adjusted to shown. one of two positions to suit the rider’s preference. -
Page 42: Windshield
INSTRUMENT AND CONTROL FUNCTIONS 4. Insert the projection on the rear of EAU49882 Windshield the rider seat into seat holder B as If the original windshield is removed shown. and then reinstalled, be sure to install the windshield screws in the lower holes and tighten the screws to the specified torque. -
Page 43: Adjusting The Front Fork
Adjusting the front fork An accessory windshield is available at EWA10180 WARNING your Yamaha dealer. The upper holes are only to be used for installing the ac- Always adjust both fork legs equal- cessory windshield. ly, otherwise poor handling and loss of stability may result. - Page 44 INSTRUMENT AND CONTROL FUNCTIONS Spring preload setting: Rebound damping setting: Compression damping setting: Minimum (soft): Minimum (soft): Minimum (soft): 10 click(s) in direction (b)* 13 click(s) in direction (b)* Standard: Standard: Standard: 8 click(s) in direction (b)* 6 click(s) in direction (b)* Maximum (hard): Maximum (hard): Maximum (hard):...
-
Page 45: Adjusting The Shock Absorber Assembly
INSTRUMENT AND CONTROL FUNCTIONS EAU49690 Adjusting the shock absorber S O F T assembly This shock absorber assembly is equipped with a spring preload adjust- H A R D ing knob and a rebound damping force adjusting knob. ECA10101 NOTICE To avoid damaging the mechanism, 1. -
Page 46: Carriers
1. Standard carrier rier capacity of 5 kg (11 lb). sembly yourself. Take the shock Do not exceed the additional absorber assembly to a Yamaha carrier capacity of 5 kg (11 lb). dealer for any service. ECA16821 NOTICE... -
Page 47: Luggage Strap Holders
EAU15305 this system regularly and have a Luggage strap holders Sidestand Yamaha dealer repair it if it does not The sidestand is located on the left side function properly. of the frame. Raise the sidestand or lower it with your foot while holding the vehicle upright. -
Page 48: Ignition Circuit Cut-Off System
INSTRUMENT AND CONTROL FUNCTIONS EAU44902 Ignition circuit cut-off system The ignition circuit cut-off system (com- prising the sidestand switch, clutch switch and neutral switch) has the fol- lowing functions. It prevents starting when the trans- mission is in gear and the side- stand is up, but the clutch lever is not pulled. - Page 49 ”. stand during this inspection. • 3. Turn the key on. If a malfunction is noted, have a Yamaha 4. Shift the transmission into the neutral position. dealer check the system before riding. 5. Push the start switch. Does the engine start? With the engine still running: The neutral switch may not be working correctly.
-
Page 50: Auxiliary Dc Jack
INSTRUMENT AND CONTROL FUNCTIONS EAU49452 Auxiliary DC jack EWA14360 WARNING To prevent electrical shock or short- circuiting, make sure that the cap is installed when the auxiliary DC jack is not being used. ECA15431 NOTICE 1. Auxiliary DC jack cap The accessory connected to the 3. -
Page 51: For Your Safety - Pre-Operation Checks
• If necessary, add recommended coolant to specified level. 6-15 • Check cooling system for leakage. • Check operation. • If soft or spongy, have Yamaha dealer bleed hydraulic system. • Check brake pads for wear. Front brake • Replace if necessary. - Page 52 • Make sure that operation is smooth. • Check throttle grip free play. Throttle grip 6-17, 6-24 • If necessary, have Yamaha dealer adjust throttle grip free play and lubricate cable and grip housing. • Make sure that operation is smooth. Control cables 6-24 •...
- Page 53 FOR YOUR SAFETY – PRE-OPERATION CHECKS ITEM CHECKS PAGE • Check operation of ignition circuit cut-off system. Sidestand switch 3-32 • If system is not working correctly, have Yamaha dealer check vehicle.
-
Page 54: Operation And Important Riding Points
Yamaha dealer. The transmission is in the neutral gine in case of a turnover. In this position. -
Page 55: Shifting
The neutral indicator quate lubrication may damage light should come on. If not, ask a the transmission. 1. Shift pedal Yamaha dealer to check the elec- 2. Neutral position Always use the clutch while trical circuit. changing gears to avoid damag- Shifting gears lets you control the 3. -
Page 56: Tips For Reducing Fuel Consumption
(e.g., in traffic jams, at traffic period, immediately have a result in engine overheating must be lights or at railroad crossings). Yamaha dealer check the vehi- avoided. cle. EAU17123 0–1000 km (0–600 mi) Avoid prolonged operation above 3900 r/min. -
Page 57: Parking
OPERATION AND IMPORTANT RIDING POINTS EAU17213 Parking When parking, stop the engine, and then remove the key from the main switch. EWA10311 WARNING Since the engine and exhaust system can become very hot, park in a place where pedestri- ans or children are not likely to touch them and be burned. -
Page 58: Periodic Maintenance And Adjustment
– possibly leading to pending on the weather, terrain, geo- that is certified (if applicable). Yamaha death. See page 1-2 for more in- graphical location, and individual use, dealers are trained and equipped to... -
Page 59: Owner's Tool Kit
If you do not have the tools or experi- ence required for a particular job, have 1. Owner’s tool kit a Yamaha dealer perform it for you. The owner’s tool kit is located behind cowling A. (See page 6-8.) To access the owner's tool kit, remove cowling A with the hexagon wrench, lo- cated on the bottom of the rider seat. -
Page 60: Periodic Maintenance Chart For The Emission Control System
From 50000 km (30000 mi), repeat the maintenance intervals starting from 10000 km (6000 mi). Items marked with an asterisk should be performed by a Yamaha dealer as they require special tools, data and technical skills. -
Page 61: General Maintenance And Lubrication Chart
PERIODIC MAINTENANCE AND ADJUSTMENT EAU1770C General maintenance and lubrication chart ODOMETER READING ANNUAL ITEM CHECK OR MAINTENANCE JOB 1000 km 10000 km 20000 km 30000 km 40000 km CHECK (600 mi) (6000 mi) (12000 mi) (18000 mi) (24000 mi) √ 1 * Air filter element •... - Page 62 PERIODIC MAINTENANCE AND ADJUSTMENT ODOMETER READING ANNUAL ITEM CHECK OR MAINTENANCE JOB 1000 km 10000 km 20000 km 30000 km 40000 km CHECK (600 mi) (6000 mi) (12000 mi) (18000 mi) (24000 mi) • Check operation and for exces- √ √...
- Page 63 PERIODIC MAINTENANCE AND ADJUSTMENT ODOMETER READING ANNUAL ITEM CHECK OR MAINTENANCE JOB 1000 km 10000 km 20000 km 30000 km 40000 km CHECK (600 mi) (6000 mi) (12000 mi) (18000 mi) (24000 mi) Rear suspension re- lay arm and con- √...
- Page 64 PERIODIC MAINTENANCE AND ADJUSTMENT EAU36771 Air filter • This model’s air filter is equipped with a disposable oil-coated paper element, which must not be cleaned with com- pressed air to avoid damaging it. • The air filter element needs to be replaced more frequently when riding in unusually wet or dusty areas. Hydraulic brake and clutch service •...
-
Page 65: Removing And Installing Cowlings
PERIODIC MAINTENANCE AND ADJUSTMENT EAU18781 To install the cowling Removing and installing cowl- 1. Fit the projections on the cowling ings into the matching holes in cowling The cowlings shown need to be re- moved to perform some of the mainte- nance jobs described in this chapter. - Page 66 PERIODIC MAINTENANCE AND ADJUSTMENT EAU49550 Cowling C To remove the cowling Remove the bolts and the nuts, and then take the cowling off. 1. Cowling B 1. Cowling C 2. Bolt 2. Nut 3. Bolt To install the cowling Place the cowling in the original posi- 1.
-
Page 67: Checking The Spark Plugs
Do not attempt to diagnose wipe off any grime from the spark plug such problems yourself. Instead, have threads. a Yamaha dealer check the vehicle. If a spark plug shows signs of electrode Tightening torque: Spark plug: erosion and excessive carbon or other 13 Nm (1.3 m·kgf, 9.4 ft·lbf) -
Page 68: Engine Oil And Oil Filter Cartridge
PERIODIC MAINTENANCE AND ADJUSTMENT EAU49503 4. Remove the engine oil filler cap, Engine oil and oil filter car- the drain bolt and its gasket to tridge drain the oil from the oil tank. The engine oil level should be checked before each ride. - Page 69 Skip steps 7–11 if the oil filter cartridge An oil filter wrench is available at a seated. is not being replaced. Yamaha dealer. 10. Install the new oil filter cartridge 7. Remove cowling C. (See page 9. Apply a thin coat of clean engine with an oil filter wrench, and then 6-8.)
- Page 70 In order to prevent clutch slip- correct, immediately turn the engine off and have a Yamaha dealer check page (since the engine oil also Tightening torques: Engine oil drain bolt (crankcase): the vehicle.
-
Page 71: Final Gear Oil
23 Nm (2.3 m·kgf, 17 ft·lbf) filler hole. for oil leakage before each ride. If any leakage is found, have a Yamaha deal- To change the final gear oil er check and repair the vehicle. In addi- 1. Place the vehicle on a level sur- tion, the final gear oil level must be face. -
Page 72: Coolant
Recommended final gear oil: Yamaha genuine shaft drive gear oil EAU40154 To check the coolant level SAE 80 API GL-5 or SAE 80 API 1. -
Page 73: Air Filter Element
Have a maintenance and lubrication chart. only the coolant reservoir cap. Yamaha dealer change the coolant. Have a Yamaha dealer replace the air Never attempt to remove the ra- WARNING! Never attempt to remove filter element. -
Page 74: Checking The Engine Idling Speed
To prevent this necessary, have it corrected by a from occurring, the valve clearance Yamaha dealer. must be adjusted by a Yamaha dealer at the intervals specified in the periodic Engine idling speed: 1050–1150 r/min maintenance and lubrication chart. -
Page 75: Tires
The tire air pressure must be Never overload your vehicle. Opera- cracked, have a Yamaha dealer re- checked and adjusted on cold tion of an overloaded vehicle could place the tire immediately. - Page 76 After extensive tests, only the tires list- being illegal, operating the vehi- ed below have been approved for this cle with excessively worn tires model by Yamaha Motor Co., Ltd. decreases riding stability and can lead to loss of control. Front tire:...
-
Page 77: Spoke Wheels
Yamaha dealer replace the clutch system. If there is air in the hy- wheel. Do not attempt even the draulic system, have a Yamaha dealer 1. No brake lever free play smallest repair to the wheel. A de- bleed the system before operating the formed or cracked wheel must be motorcycle. -
Page 78: Brake Light Switches
The front and rear brake pads must be come on just before braking takes ef- checked for wear at the intervals spec- fect. If necessary, have a Yamaha deal- ified in the periodic maintenance and er adjust the brake light switches. -
Page 79: Checking The Brake Fluid Level
EAU40261 Rear brake Checking the brake fluid level touches the brake disc, have a Yamaha Before riding, check that the brake fluid dealer replace the brake pads as a set. is above the minimum level mark. -
Page 80: Changing The Brake And Clutch Fluids
Use only the specified brake flu- fluid level goes down suddenly, have a EAU22751 Changing the brake and id; otherwise, the rubber seals Yamaha dealer check the cause before clutch fluids may deteriorate, causing leak- further riding. Have a Yamaha dealer change the age. -
Page 81: Checking And Lubricating The Cables
Yamaha dealer at the intervals speci- bricated if necessary. ed if necessary. If a cable is damaged fied in the periodic maintenance chart. -
Page 82: Checking And Lubricating The Brake And Clutch Levers
PERIODIC MAINTENANCE AND ADJUSTMENT Brake pedal EAU43601 Brake lever Checking and lubricating the brake and clutch levers The operation of the brake and clutch levers should be checked before each ride, and the lever pivots should be lu- bricated if necessary. Shift pedal Clutch lever Recommended lubricant:... -
Page 83: Checking And Lubricating The Centerstand And Sidestand
The operation of the centerstand and The swingarm pivots must be lubricat- sidestand should be checked before ed by a Yamaha dealer at the intervals each ride, and the pivots and metal-to- specified in the periodic maintenance metal contact surfaces should be lubri- and lubrication chart. -
Page 84: Checking The Front Fork
2. Hold the lower ends of the front fork does not operate smoothly, tion. WARNING! To avoid injury, fork legs and try to move them for- have a Yamaha dealer check or re- securely support the vehicle so ward and backward. If any free pair it. -
Page 85: Checking The Wheel Bearings
EWA10760 WARNING To charge the battery Electrolyte is poisonous and Have a Yamaha dealer charge the bat- dangerous since it contains sul- tery as soon as possible if it seems to furic acid, which causes severe have discharged. Keep in mind that the burns. -
Page 86: Replacing The Fuses
PERIODIC MAINTENANCE AND ADJUSTMENT battery tends to discharge more quickly is turned to “OFF”, then con- EAU49581 Replacing the fuses if the vehicle is equipped with optional nect the positive lead before The fuse boxes and the ABS motor electrical accessories. connecting the negative lead. - Page 87 PERIODIC MAINTENANCE AND ADJUSTMENT use a fuse of a higher amperage Specified fuses: rating than recommended to Main fuse: avoid causing extensive dam- 50.0 A Headlight fuse: age to the electrical system and 20.0 A possibly a fire. [EWA15131] Taillight fuse: 7.5 A Signaling system fuse: 10.0 A...
-
Page 88: Replacing A Headlight Bulb
PERIODIC MAINTENANCE AND ADJUSTMENT 4. If the fuse immediately blows EAU39013 Replacing a headlight bulb again, have a Yamaha dealer This model is equipped with halogen check the electrical system. bulb headlights. If a headlight bulb burns out, replace it as follows. -
Page 89: Tail/Brake Light
6. Install the headlight bulb cover by This model is equipped with an LED- turning it clockwise. type tail/brake light. 7. Have a Yamaha dealer adjust the If the tail/brake light does not come on, headlight beam if necessary. have a Yamaha dealer check it. -
Page 90: Replacing A Turn Signal Light Bulb
PERIODIC MAINTENANCE AND ADJUSTMENT EAU24204 EAU49721 Replacing a turn signal light Replacing a license plate light bulb bulb 1. Remove the turn signal light lens 1. Remove the license plate light unit by removing the screw. bolts. 1. Turn signal light bulb 3. -
Page 91: Replacing An Auxiliary Light Bulb
PERIODIC MAINTENANCE AND ADJUSTMENT 6. Place the license plate light unit in EAU49623 Replacing an auxiliary light the original position, and then in- bulb stall the bolts. This model is equipped with two auxil- iary lights. If an auxiliary light bulb burns out, replace it as follows. - Page 92 PERIODIC MAINTENANCE AND ADJUSTMENT supported. NOTICE: Be careful 5. Remove the auxiliary light bulb not to pull the headlight leads. socket (together with the bulb) by turning the socket counterclock- [ECA16810] wise. 1. Panel 2. Quick fastener 3. Remove the headlight unit cover 1.
-
Page 93: Troubleshooting
However, should your motorcycle 11. Install the panel by installing the require any repair, take it to a Yamaha quick fasteners. dealer, whose skilled technicians have 12. Install the windshield by installing... -
Page 94: Troubleshooting Charts
Remove the spark plugs and check the electrodes. The engine does not start. Have a Yamaha dealer check the vehicle. Check the battery. 4. Battery The engine turns over The battery is good. - Page 95 Start the engine. If the engine overheats again, have a The coolant level Yamaha dealer check and repair the cooling system. is OK. If coolant is not available, tap water can be temporarily used instead, provided that it is changed to the recommended coolant as soon as possible.
-
Page 96: Motorcycle Care And Storage
Rust and corrosion can develop matte colored finished parts. Be ECA10772 even if high-quality components are sure to consult a Yamaha dealer for NOTICE advice on what products to use be- used. A rusty exhaust pipe may go un- Avoid using strong acidic wheel fore cleaning the vehicle. - Page 97 MOTORCYCLE CARE AND STORAGE off any detergent residue using Test the product on a small hid- plenty of water, as it is harmful den part of the windshield to Salt sprayed on roads in the winter may to plastic parts. make sure that it does not leave remain well into spring.
-
Page 98: Storage
WARNING ing it with a tarp, while it is still Contaminants on the brakes or tires Consult a Yamaha dealer for ad- wet, will allow water and humid- can cause loss of control. vice on what products to use. - Page 99 MOTORCYCLE CARE AND STORAGE 2. Fill up the fuel tank and add fuel e. Remove the spark plug caps stabilizer (if available) to prevent from the spark plugs, and then Make any necessary repairs before the fuel tank from rusting and the install the spark plugs and the storing the motorcycle.
-
Page 100: Specifications
98.0 × 79.5 mm (3.86 × 3.13 in) Clutch type: Type: Compression ratio: Wet, multiple-disc Yamaha genuine shaft drive gear oil SAE 11.00 : 1 Transmission: 80 API GL-5 or SAE 80 API GL-4 Hypoid Starting system: Primary reduction ratio:... - Page 101 SPECIFICATIONS Secondary reduction ratio: Manufacturer/model: Rim size: 2.987 (21/25 x 32/9) METZELER/TOURANCE EXP C 19M/C x MT2.50 Transmission type: Rear tire: Rear wheel: Constant mesh 6-speed Type: Wheel type: Operation: Tubeless Spoke wheel Left foot operation Size: Rim size: Gear ratio: 150/70R17M/C 69V 17M/C x MT4.00 1st:...
- Page 102 SPECIFICATIONS Spring/shock absorber type: High beam indicator light: ABS motor fuse: Coil spring/gas-oil damper 30.0 A Wheel travel: Oil level warning light: ABS solenoid fuse: 190.0 mm (7.48 in) 20.0 A Electrical system: Turn signal indicator light: Auxiliary DC jack fuse: 3.0 A Ignition system: Coolant temperature warning light:...
-
Page 103: Consumer Information
Record the vehicle identification num- ber and model label information in the spaces provided below for assistance when ordering spare parts from a Yamaha dealer or for reference in case the vehicle is stolen. VEHICLE IDENTIFICATION NUMBER: 1. Vehicle identification number 1. - Page 104 INDEX Maintenance and lubrication, periodic..6-4 Maintenance, emission control system ... 6-3 ABS............3-20 Engine break-in ........5-3 Matte color, caution.........7-1 ABS warning light........3-7 Engine idling speed, checking ....6-17 Model label..........9-1 Air filter element ........6-16 Engine oil and oil filter cartridge ... 6-11 Multi-function meter unit......
- Page 105 INDEX Tires............6-18 Tool kit ............ 6-2 Traction control system ......3-21 Traction control system indicator/ warning light ......... 3-7 Troubleshooting........6-36 Troubleshooting charts ......6-37 Turn signal indicator lights ...... 3-5 Turn signal light bulb, replacing.... 6-33 Turn signal switch......... 3-16 Valve clearance ........
- Page 108 PRINTED IN JAPAN PRINTED ON RECYCLED PAPER 2011.08-0.3×1 CR...